Buy a Donated Boat

Go Back to

Boats for Sale

Page

Lippincott 30 Cruising Yacht                                     $14,900

PLEASE NOTE:  Included with this boat is free transportation to the ocean (Atlantic) or free winter storage.

 

 

This is a truly exceptional boat that must be seen to be fully appreciated.   It was very well kept and enhanced by the donor, who has another boat on the ocean and decided he doesn’t need two big boats!

 

You will see in the pics and description below that it is extremely well appointed, with good sails, a newly rebuilt Yanmar diesel engine, autopilot, instruments that all work, newly painted topsides and a roomy and comfortable cabin.   The Bimini and dodger are in very good shape, and the cockpit cushions are brand new.   The rudder was replaced last year.

 
SPECS and DETAILS:

Year:                              1984

HIN#                               LPP30076V841


Dimensions
Length Overall:           30.3'
Beam:                          10'

Draft:                          4.9’

Displacement:             8600 Lbs

Ballast:                        4000 Lbs

Sails:
North Sail performance/cruising main,

No. 1 Super Sailmaker 110% working jib on Pro-Furling roller furl,

No. 2 North Sails 150% Roller Furling Jib

Engine

Yanmar Diesel.   Rebuilt by J-Way Enterprises in Weymouth MA with 25 hours on her.

Navigational equipment
Compass
Masthead Light
Navigation Lights
VHF:                           Standard Horizon Quest Gx1255s
Autopilot:                    Simrad WP-10 Wheel Pilot
Wind Instrument:        Furuno
Depth Sounder:           Datamarine S-2000DL
Knotmeter:                  Datamarine S-100

Deck Features
Anchor Locker:
Self tailing winches

Anchor w/200ft of rode

Spare anchor

Anchor bow roller

Cockpit cushions

Padded lifelines

Propane BBQ Grill

Wheel cover

Winch covers
Bimini
Dodger

Fitted boom cover
Edson wheel steering/Binnacle

50ft 30amp shore tie

Safety Equipment
Life Sling:
Life Jackets:    8

Full double lifelines

Accomodations
Sleep. Capacity:          5
Water Capacity:          30 gals

Enclosed head with shower & sink
Kenwood KDC-MP2032 Sirius Satellite Capability AM/FM, CD Stereo Radio
Small auxiliary space heater,

 

Galley

2 burner alcohol stove

Built-in ice chest

Sink


Construction Features
Designer:                     Howard Lippincott Jr.
Hull Material:              Fiberglass
Keel Type:                   Fin With Rudder On Skeg
Exterior Color:            White – new paint on topsides
Closed Transom:

 

 

 Here is a good review of the boat we found online:

 

Although many one-design sailors are familiar with Lippincott Boat Works of Riverton, NJ, this is not a particularly well known builder among most cruising sailors. One of only two cruiser models ever built by the company, the Lippincott 30 is a comfortable, well-built boat that offers good sailing characteristics. And, because its builder is less well known, it is typically priced below other builders of similar quality boats.

Lippincott Boat Works was founded in 1946 by brothers Howard and Robert Lippincott, and throughout most of the company’s 40-year history, they built one-design racing sailboats. Some of the best sailors in the world—Tom Blackaller and Dennis Conner to name only two, and some less notables, such as yours truly—have competed and won in Lippincott-built Comet, Lightning, and Star class one-design boats. 

The Lippincott 30 was designed by Howard “Skip” Lippincott Jr. and was introduced in 1979. It remained in production until the mid-1980s although fewer than 100 boats were produced. The design features 1970s-era contemporary styling and a moderate approach to sailing performance and cruising comforts. 

The Lippincott 30 hull is solidly constructed of hand-laid fiberglass laminates. Because all were built before it was common to use vinylester resin for exterior finishes, some elevated moisture below the waterline is common, although I have not run across any cases of extreme osmotic blistering. 

In lieu of fiberglass liners for structural reinforcement, Lippincott opted for the more traditional method of wood structural components. Full and partial plywood bulkheads are bonded to the hull with fiberglass cloth and resin in accordance with good boat building practice, and it is rare to find serious structural problems with these boats.

Decks and cabin structures are built with a balsa wood core between fiberglass laminates. Considerable care was taken by the builder to ensure hardware was well-bedded, and serious deck problems are not typical. The deck and hull are joined on an inward hull flange with adhesive sealant, nuts, bolts, and washers. The quality of construction and finish is well above that of most moderately priced, production boats. If I have any complaint, it’s the fact that flat washers, rather than more substantial backing plates, are used for the attachment of deck hardware. 

The foredeck of the Lippincott 30 features a narrow and deep anchor locker that stores a Danforth-type anchor vertically rather than the more traditional broad, flat anchor lockers. The only drawback to this arrangement I can see is that the shape would not accommodate a plow type anchor. Standard equipment includes a welded stainless steel bow rail, double life lines supported by stainless steel stanchions, and a welded stainless steel stern rail with a built-in swim ladder. Two fiberglass composite deck hatches, one forward of the mast and one aft, were also standard equipment. A small teak toe rail at the deck edge offers added security. 

The cockpit seats four adults comfortably, and the pedestal-mounted wheel steering was standard equipment. There are a large locker below the port cockpit seat and a small but deep locker at the aft end of the starboard cockpit seat. This second small seat locker is unusual on a 30-foot boat with a quarter berth and provides handy, cockpit-accessible storage. 

The arrangement of the Lippincott 30 is typically described as “sleeping six”—two in a V-berth, two in a pull-out starboard settee, one in a fixed port settee, and one in a starboard quarter berth aft. While this may be accurate, if four of the six are young children, the Lippincott 30 provides what I would describe as acceptable accommodations for four adults or a family of five. The V-berth provides good length but is very narrow at the forward end. The settee berths in the main saloon are barely over six feet long, and the starboard settee is not wide enough for two adults. 

The main saloon and V-berth cabin are separated by an athwartships head. There is a relatively large galley to port of the companionway.

The interior is very nicely finished with an abundance of mahogany veneered plywood, a teak and holly cabin sole, and varnished mahogany trim. Hull sides of the V-berth and quarter berth are finished with a mahogany ceiling for a luxurious, traditional look that isn’t possible with fiberglass liners. 

Auxiliary power is provided by a 13-hp, two-cylinder Yanmar diesel with reasonably good access for service. While this may be a bit underpowered for severe conditions, it is sufficient for most likely situations.

Other than one brief sea trial, I have not had an occasion to sail the Lippincott 30, but all owners I have spoken with report good performance and no bad habits. The sail area/displacement ratio of 17.3 and displacement/length ratio of 246 are indicative of a boat that should be easily handled, yet provide good performance in a variety of wind conditions. Shoal and standard draft models were offered, although standard draft is still less than five feet. Ballast on both is 4000 pounds, which is 47 percent of the total displacement, and combined with 10-foot beam, should make for a fairly stiff boat.

There are several Lippincott 30s offered for sale at any given time. I found four current offerings with asking prices ranging from $19,000 to $27,500 and three recent sales with an average selling price of $21,500. 

Selling prices are only slightly higher than a comparable aged production boat such as a Catalina 30, and the higher quality of construction and finish make the Lippincott 30 worth a serious look for sailors in the market for a boat in this age, size, and price range.

Reviewed in the September 2007 issue of SpinSheet by Jack Hornor

 

 

 

As a non-profit, our policy is to sell below market price so as to move donated boats quickly. You can confirm this by looking at Yachtworld, Craigslist, and other online sources, where you will find that these boats are typically listed from the mid teens to low 20’s.  Please contact us with all your questions.

Go Back to

Boats for Sale

Page

Lake Winnipesaukee Sailing Association, LWSA New Hampshire Sailing, J/80 Fleet 1, J/80 Fleet One, J80 Fleet 1, J80 Fleet One, Gilford Sailing, WAR Regatta, W.A.R. Regatta, Winnipesaukee Annual Regatta, Winnipesaukee Regatta, LWYRA, Lake Winnipesaukee Sailing, Lake Winnipesaukee Sailing Lessons, Lake Winnipesaukee Sailing School, Lake Winnipesaukee Sailing Academy, New Hampshire Sailing Lessons, New Hampshire Sailing School, New Hampshire Sailing Academy, private sailing lessons in New Hampshire, private sailing lessons on Lake Winnipesaukee, Lakes Region Sailing, Laconia Sailing, Meredith Sailing, Alton Sailing, Belmont Sailing, Gilmanton Sailing Lessons, Lakes Region Sailing Lessons, Laconia Sailing Lessons, Meredith Sailing Lessons, Alton Sailing Lessons, Belmont Sailing Lessons, Gilmanton Sailing Lessons, Dave Adams Memorial Sailing Center, Dave Adams Sailing Center, LWSA Sailing Center, Smith Cove Sailing, New Hampshire Boating, Lake Winnipesaukee Boating, Lakes Region Boating, Frying Pan Double Handed Regatta, Labor Day Weekend Regatta, Take Your Time Race, Spring Into Summer Regatta, PHRF Series Awards, Fay’s Boatyard Race, “(603) 589-1177”, www.lwsa.org, lwsa.org, j-jamboree, sailing for good, O’Pen Bic, 420 racing, PHRF racing New England, PHRF racing New Hampshire, LWSA Youth Racing Club, Afterschool Sailing Lessons Parks & Recreation, Winnipesaukee Yacht Club, Fay’s Boatyard, Jay Norden, Jeff Rabinowitz, Al Posnack, Amy Tripp, Ben Crosby, Wyatt Himmer, Alan Himmer, Smith Cove in Gilford, US Sailing New Hampshire, US Sailing certified instructor